Paint for Exterior Walls
Farbius® exterior paint is a full-value silicone resin paint with a high percentage of silicone resin based on modified silicone resin emulsion. Farbius® is also highly suitable to be used as an equalizing paint for mineral based Farbius® Energy Saving Finishing Coat and Farbius® Restoration Render. Its special ceramic microspheres provide an ideal temperature and humidity balance. These properties result in a positive energy saving effect. A wide range of color options is available from the Farbius® color palette or can be mixed at your individual request.
- Regulating temperature through high degree of reflection
- Emissivity according to DIN EN 12898, April 2001: ≥ 90%
- Prevention of algae and fungi
- Available in white and other colors
- Excellent opacity
- High degree of water vapor permeability
- Weather-proof, longer intervals between coatings
- Easy to apply
- Low surface tension, crack repair up to 0.5mm
- Less prone to soiling
- Micro-porous and not film-forming
Exposure to artificial weathering
Stress by reflecting UV radiation and water according to DIN EN ISO 11507: Farbius® is highly UV-A Resistant. After 1000 hours of artificial weathering (Exposure to UV-A radiation and water) the approved Farbius® coating shows a very good resistance (no color change, no delamination, no blistering, no rust, no cracking, no peeling, low chalking).
Determination of radiation-related parameter in accordance with DIN EN 410 and DIN EN 12898 (absorptivity and emissivity):
The measurement is carried out on a Perkin-Elmer-Grid spectrometer Lambda 19 with 150mm integrating sphere. A spectralon is used as calibrated reference standard.
The emissivities are determined based on DIN EN 12898, issue April 2001: the normal overall reflectivities Rn are calculated at a temperature of 283 K. The measurement is performed in the wavelength range between 2.5 and 25 μm on a FTIR-spectrometer Vertex 70 from Bruker Optics with intergrating sphere. Gold is used as a reference material.
Normal emissivity* ɛn = 94%
Absorptivity* Α = 14%
*) Transmittance of all samples = 0
Fire behavior according to DIN 4102, part 1:
Farbius® meets with a maximum application rate of 400-g/m2 applied to solid mineral surfaces, the requirements of class A2 for non-combustible materials according to DIN 4102, Part 1 (May 1998). Testing institute Hoch, Lerchenweg 1, D -97650 Fladungen, certificate PZ-Hoch-131357 valid until 30/09/2018.
Farbius® is a solvent-free facade paint with mineral-based structure. It can be applied on Farbius® Finishing Coat or Farbius® Wall Filler, all plasters and mineral subsurfaces. Farbius® is highly suitable to be used as an equalizing paint for Farbius® mineral plasters and Farbius® -262. Other areas of application include restoration render on all subsurfaces that have been painted as well as old insulation veneers.
Farbius® is ready to use. It can be diluted with up to 5% clean water for primer and intermediate coating and up to 2% for final coating. Depending on the type of substrate, a primer with Farbius® may be required. Farbius® can be applied evenly as equalizing paint in the same hue as the plaster 72 hours after completion of the mineral based Farbius® Coat through rolling over the substrate with a suitable paint roller, a brush or appropriate spraying tools. The nozzle size should be between 0.036 "(0.91 mm) and 0.045" (1.04mm). The substrate must be dry, firm, must be free from dust and loose parts or separating agents (e.g., forming oil). The object and ambient temperature must not go below +5 °C and above +30 °C. Drying time is 12 hours under normal conditions (+20°C/65% relative humidity). Lower temperatures and higher humidity will require more time.
Do not process in direct sunlight, rain or higher air humidity. Please request further assistance when in doubt about processing, subsurface or constructional features. In all other respects the provisions of the current standards apply.
Do not mix with other types of materials. Stir well before processing. Cover adjacent components well to avoid splashing. Clean Tools thoroughly with water after use. Containers must be completely emptied and recycled.
The use of proven and continuously tested raw materials guarantees consistently high quality. State of the art manufacturing facilities ensures consistent product characteristics. Product quality control is conducted constantly in the factory.
Depending on the type and porosity of the substrate approximately 0.2 - 0.3 l/m². Caution: Rough surfaces can increase usage. Precise amounts are determined by testing on sample plots.
Farbius® coating system is formulated to prevent algae and fungi. Whether or not and to what extent algae and fungi occur depends on local and prevailing conditions. Through its optimal surface structure, Farbius® makes the surface dry and thereby works against the formation of algae and fungi to a large extent.
Solvent-free, water-dilutable (max. 2-5 %), environmentally friendly and odor free
Water-resistant, microporous and non film-forming
Highly permeable to water vapor (sD –value 0.05 in accordance with EN ISO 7783-2)
Capillarywater absorption w-value after 24 hours 0.05 Kg/m2h0,5 in accordance with DIN EN 1062-3.
Gloss level: matt (DIN 53778), ph-value 9.0 (+/ - 1.0)
Density 1.05 g/ cm³ (+/- 0.1)
Viscosity: 1640 mPas(+/- 500)
Degree of reflection>80% white
COV/VOC: < 1 g/l
Avoid frost. Min. 12 months shelf life in originally sealed container. See imprint for date of manufacture.
15 liter pails
Information provided in this pamphlet is based on our current technical knowledge and experience. It only provides a general guideline and therefore does not free the user from making their own tests and trials due to the multitude of factors that may affect processing and application of our products. A legally binding guarantee of certain properties or fitness for a particular purpose cannot be derived. Proprietary rights and existing laws and regulations must be observed by the user at their own responsibility. This data sheet replaces all previous versions.
May irritate eyes. Do not get in eyes. Keep out of reach of children. First Aid Treatment: If in eyes, rinse with running water for 10 minutes. Contact your municipal/provincial Government for information.